Vishay推出超高精度Z箔表面贴装电流感应芯片电阻器
2013-04-17 11:07:50 来源:网络 点击:1200
【哔哥哔特导读】威世精密集团公司宣布其威世箔电阻品牌(目视)发布了一个新的超高精密z箔表面电流传感芯片电阻器,是这个行业的第一个这样的装置结合高额定功率为1 W + 70°C和低的TCR±0.2 ppm /°C从-55°C,典型+ 125°C,+ 25°C ref。通过驱散高达1 W 1625包大小,VCS1625ZP允许设计者使用一个单一的装置测量大电流比之前可能的。
摘要: 威世精密集团公司宣布其威世箔电阻品牌(目视)发布了一个新的超高精密z箔表面电流传感芯片电阻器,是这个行业的第一个这样的装置结合高额定功率为1 W + 70°C和低的TCR±0.2 ppm /°C从-55°C,典型+ 125°C,+ 25°C ref。通过驱散高达1 W 1625包大小,VCS1625ZP允许设计者使用一个单一的装置测量大电流比之前可能的。
Vishay宣布其威世箔电阻品牌(目视)发布了一个新的超高精密z箔表面电流传感芯片电阻器,是这个行业的第一个这样的装置结合高额定功率为1 W + 70°C和低的TCR±0.2 ppm /°C从-55°C,典型+ 125°C,+ 25°C ref。通过驱散高达1 W 1625包大小,VCS1625ZP允许设计者使用一个单一的装置测量大电流比之前可能的。
Vishay Precision Group, Inc. announced that its VishayFoil Resistors brand (VFR) has released a new ultra-high-precision Z-Foil surface-mount current sensing chip resistor that is the industry’s first such device to combine a high power rating of 1 W at +70°C and low TCR of ±0.2 ppm/°C typical from -55°C to +125°C, +25°C ref. By dissipating up to 1 W in the 1625 package size, the VCS1625ZP allows designers to use a single device to measure larger currents than previously possible. For high-power applications, the device offers tight tolerances to ±0.2% (0.1% and 0.05% are available) and a four-terminal Kelvin configuration for increased accuracy.The VCS1625ZP features a power coefficient (ΔR due to self-heating) of 5 ppm at rated power, a thermal stabilization time of <1 ns (nominal value achieved within 10 ppm of steady state value), and a wide resistance range from 0.3 Ω to 10 Ω. Any resistance value within this range is available at any tolerance with no additional cost or lead time effect. The resistor offers a rise time of 1.0 ns with effectively no ringing, short time overload of <0.005% (50 ppm), current noise of 0.010 µVrms/V of applied voltage (<-40 dB), and a voltage coefficient of <0.1 ppm/V.
Offering the utmost in electrostatic discharge (ESD) immunity, the device withstands ESD to at least 25 kV, for increased reliability, and offers a non-inductive (<0.08 μH), non-capacitive design. The Bulk Metal® Foil technology of the VCS1625ZP provides a significant reduction of the resistive component’s sensitivity to ambient temperature variation (TCR) and to the self-heating effect caused by changing loads. This allows designers to guarantee a high degree of stability and accuracy in fixed-resistor applications. In addition, the resistor’s design results in a very low thermal EMF of 0.05 μV/°C typical, which is critical in precision applications.
The VCS1625ZP’s load-life stability of 0.015% at +70°C for 2000 hours at rated power is an order of magnitude better than typical current sensing resistors. The device’s improved stability makes it ideal for tightened-stability reference voltage and precision current sensing applications in forced-balance electronic scales, measurement instrumentation, bridge networks, motor controllers, and medical and test equipment. In addition, the resistor can be tested in accordance with EEE INST 002 (MIL PRF 55342) for military and space applications.
The all-welded construction of the VCS1625ZP is composed of a Bulk Metal Foil resistive element with plated copper terminations. The flat terminations make intimate contact with the resistive layer along the entire side of the resistive element, thereby minimizing temperature variations. In addition to the low thermal EMF compatibility of the device’s metals, the uniformity and thermal efficiency of the design minimize the temperature differential across the resistor, thereby assuring low thermal EMF generation at the terminations. This further reduces the thermal EMF voltage, or “battery effect,” exhibited by most current sensing or voltage reference resistors.
The device released today is characterized by extremely low excess noise when compared with other resistor technologies. Additionally, the current in adjacent current carrying paths runs in opposing directions, cancelling the parasitic inductance of these paths. Also, path-to-path capacitances are connected in series, which has the effect of minimizing the parasitic capacitance of the resistor. The low-inductance/capacitance device is characterized by non-measurable peak-to-peak signal distortions.
The VCS1625ZP is available with tin/lead or lead (Pb)-free gold or tin termination options, and with additional post-manufacturing operations (PMO) to extend the operating temperature from +150°C to well above +200°C.
Samples and production quantities of the VCS1625ZP are available now, with lead times of five working days for samples and eight weeks for standard orders. Pricing for U.S. delivery starts at 4.05.
本文为哔哥哔特资讯原创文章,未经允许和授权,不得转载,否则将严格追究法律责任;
2021年3月8日-3月12日,本周精选新品速递来袭,详情请查看下文。
2020年11月15日-21日,Vishay推出新型汽车级接近传感器,压力感测分辨率高达20 µm;Nordic助力多协议游戏键盘中枢支持低延迟游戏主机、手机和PC游戏;意法半导体携手施耐德电气揭秘AI人流量监测解决方案等。以下是本周新品详情。
宾夕法尼亚、MALVERN — 2020年10月28日 —日前,Vishay Intertechnology, Inc.(NYSE 股市代号:VSH)宣布,推出新系列低阻抗、汽车级小型铝电解电容器--- 170 RVZ,纹波电流高达3.8 A,可在+105 °C高温下工作,105°C条件下使用寿命长达10,000小时。
近年来,在新能源汽车对车规级汽车电子要求和需求量双重提高的背景下,一些磁件企业不断加大研发投入,倾力打造符合当下汽车需求的电感器。
近些年随着电子产品的更新迭代速度越来越快,消费类电子终端产品不断走向“小型化、集成化、多功能化、大功率化等的发展方向;在电感行业的美商Vishay握有的Molding专利将于2017年到期解禁之际,加之目前传统功率电感的局限性。
2017年2月21日,致力于亚太地区市场的领先半导体元器件分销商---大联大控股宣布,其旗下世平推出基于ADI、EPCOS、Fairchild、Micron、MXChip、NXP、Onsemi、TI、Toshiba、Vishay、ZTE等众多国际大厂器件的电动汽车之直流充电桩参考设计。
第一时间获取电子制造行业新鲜资讯和深度商业分析,请在微信公众账号中搜索“哔哥哔特商务网”或者“big-bit”,或用手机扫描左方二维码,即可获得哔哥哔特每日精华内容推送和最优搜索体验,并参与活动!
发表评论